Tag: <span>Work Stand</span>

Many workshops have specialist work stands for recumbent trikes. I considered building my own, but I have better projects to fill my time. My solution uses a trestle table, lumber,...

Top Categories

Equipment 13
This section is mostly about improving your mount. By changing the gearing, pedals, tires and more, you can enjoy your ride a lot more without spending a heap of money.

Latest : Using Your DIY Recumbent Ramp on a Ute/Pickup Truck
Carrying Your Trike 7
Recumbent trikes are unwieldy to lift, store or carry on or in a car. Too many recumbent ramblers only ride close to home because they can't get their trikes to other places conveniently. Here we look at several solutions I have tried over time - along with pros and cons.

Latest : Using Your DIY Recumbent Ramp on a Ute/Pickup Truck
General 5
And then there are the blogs for recumbent ramblers that don’t fit in any category. I had to put them somewhere.

Latest : Bent Trikes for Mushing
Drivetrain 5
The pedals connect to the crankset. The crankset connects to the chain. The chain attaches to the cassette or sprocket. The cassette connects to the rear wheel. The sprocket connects to the internal hub gears. The internal hub gears connect to the wheel. The wheel supports the tire. The tire connects to the road. Forward we go. Isn’t that simple?

Latest : Changing Cranksets
Rides 3
I provided detailed information, video and maps of many of my rides. The written report provides a quick ready (with some photos). The video will show you the ride so you can decide if it is for you. The map tells you where to go - a detail often missing on the official sites.

Latest : Crows Nest – Byers Road Loop

Tag: Work Stand

A Work Stand for a Recumbent Tadpole Trike

Latest : Using Your DIY Recumbent Ramp on a Ute/Pickup Truck

Latest : Using Your DIY Recumbent Ramp on a Ute/Pickup Truck

Latest : Bent Trikes for Mushing

Latest : Changing Cranksets

Latest : Crows Nest – Byers Road Loop